CB/FCB-BA-e-0640
11
6.2.2 Scope of delivery
Serial accessories:
•
Balance
•
Weighing plate
•
2 x transport security
•
Mains power supply
•
Protective cover
•
Operating Manual
6.2.3 Basic
structure
•
Place the balance on a horizontal and solid base.
•
Remove the transport security on the 4-point support.
•
Pull off the protection foil from the weighing plate if existing.
•
Attach the weighing plate.
6.3 Mains
connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
6.4 Operation using a (rechargeable) battery (optional)
Lift-off the battery cover on the lower side of the balance. Connect 9 V compound
battery.
Reinsert the battery cover.
For battery operation the balance has an automatic switch-off function which can be
activated or deactivated in the menu (chapter 8.1). Proceed as follows:
Switch-on the balance using the
key and wait for the
„0“
display.
Press the
key and keep it pressed until
„UNIT“
appears on the display.
Press the
key four times, in the display appears
„AF“
.
Confirm by pressing the
key.
Use the
key to choose between the two following settings:
1)
„AF on“:
To save the battery, the balance switches off automatically 3
minutes after
having finished the weighing procedure.
2)
„AF off“:
Switch-off function deactivated.
Use the
key to confirm your selected setting.