11
OBS-1-BA-e-1912
5
Operation
5.1 Getting started
The very first step is to establish a power connection using the mains plug. After
switching on the lighting you should first adjust the
dimmer
to a
low level
, so that
when you look through the eyepiece for the first time, your eyes are not immediately
subject to a high level of light.
The next step is to
place an object holder
with the sample on the mechanical stage.
To do this, the cover glass must be facing upwards. You can fix the object holder to
the stage using the slide holder
(see illustration on the left)
. Depending on the type of
the stage you can move the sample into the beam path manually (OBS 101, OBS
104) or by using the adjustment wheels on the right of the stage (OBS 106)
(see
illustration on the right)
.
You can position only one object holder.
Summary of Contents for OBS 101
Page 2: ......
Page 7: ...OBS 1 BA e 1912 6 2 Nomenclature...
Page 9: ...OBS 1 BA e 1912 8...
Page 10: ...9 OBS 1 BA e 1912...
