KERN-DEUDIAM DK 32, Operating Manual

Page: 3 / 20

Manual
03/2015
2.3 Your drill stand
On the plate of your drill stand are written the
serial number and type of machine.
Please write in these data in the following
frames.
Type:
Serial number
Please, report these data at your inquiries.
3. System description
3.1.1 Use of drill stand
The drill stand is designed for "dry" and "wet"
drilling in mineral materials by means of diamond
crowns.
The drill stand is suitable for work with electric,
hydraulic and pneumatic drilling motors with
power up to 3.5 kW.
The drill stand has to be reliably fixed on a
material surface by means of the expansion bolt
(anchor), the vacuum pump or
a fast-sliding
support.
Strictly observe the regulation of the service and
the maintenance, described in this manual.
Observe also instructions on safety, installation
and operation of the used additional equipment
and the diamond tools.
In order to avoid traumas use only the original
equipment and the diamond tool of KERN-
DEUDIAM.
3.1.2 Use of motor
The motor is used according to data on the plate
on the motor case. When using the special
machines are to observe additional requirements
specified in order confirmation.
Drilling motors belong to the class of protection
of "I" that ensures safety through use of FI-
/PRCD switches.
When using the corresponding crowns possibly
drilling of openings in various materials:
- Concrete
(including with strong reinforcing)
- Sandstone and limestone
- Various construction materials for massive
walls
- Asphalt coverings.
The drill motors belong to category II that means
that they have to be used with drill stands (DIN
57100 or VDE 0100).
The drill stand should have:
- Protection of reverse motion
- Adjustability for water drainage.
The motor has to be connected:
- via the personal protective switch (FI or
PRCD) directly or
- through the coded (1h) plug with a
protective box (IP44) or with the FI switch
to a network of 230 V.
3.2 Consequences due to false use
When using a drill stand incorrectly, there is an
increased
health hazard for the service
personnel and for the third parties.
Use of the drilling motor with power more than
3.5 kW belongs to it.
It can lead to breakage of a motor plate or other
parts.
Manipulations or changes of a drill stand are
forbidden.
For an adjustment of a drill stand don't use a
percussion instrument (hammer). That can lead
to the damage of drill stand.
3.3 Delivery set:
Drill stand KDS-XXL-R
Drill motor DK 32
Manual.