4
Ŷ
Die Unterstützungskonsolen in Position der
Bohrlöcher bringen, ausrichten und mit ge-
eigneten Schrauben (2 Schrauben pro Kon-
sole) am Boden befestigen (Abb. 10).
Ŷ
Den Haken (4) durch das Langloch des Hal-
ters (2) stecken und in die untere Heizkörper-
lasche einhängen. Mit der Sechskantmutter
(6) und der Scheibe (7) verschrauben und mit
3 Nm anziehen (Abb. 11).
Ŷ
Anschließend Gewindeschraube (7) eben-
falls mit 3 Nm erneut festziehen (Abb. 12).
EN
–
Instructions for use
General information
Observe all instructions, in particular those re-
lating to the technical data and usage limits!
Permitted use
The support bracket may only be mounted on
FSN, PSN, PLS, PSS and PSR flat radiators. Any
other use is not intended and is therefore not
permitted.
Complaints
In case of damage, contact your specialist
installer!
Ŷ
Ensure that all assembly work and repairs
are carried out by the specialist installer,
as otherwise your statutory right to assert
claims for material defects will expire.
Maintenance and cleaning
The support bracket does not require any spe-
cial maintenance.
Ŷ
To clean the support bracket, use only mild,
non-abrasive commercial cleaning agents.
Disposal
Ŷ
Ensure the packaging and any unneeded
parts are recycled, or arrange for their pro-
per disposal. Comply with local regulations.
EN - Installation instruc-
tions
Safety instructions
Ŷ
Thoroughly read the installation instruc-
tions before assembly.
Ŷ
In addition to these instructions, also obser-
ve the instructions for the radiator and the
wall brackets.
Ŷ
Observe all instructions regarding the in-
stallation site, technical data, application
limits and floor condition.
Ŷ
The radiator and the support bracket must
be installed by a specialist installer.
Ŷ
After installation,
leave the instructions
with the end customer
.
Ŷ
The installation materials must only be
transported and stored inside the protective
packaging.
