Kermann Technical Developer and Consulting Ltd.
Phone:
(+36) 1 445 1670
E-mail:
7
The icons on the luminaire’s data label have the following meaning:
Do NOT cover the luminaire!
Do NOT put the luminaire in a box!
Please keep a minimum gap of 0.3 m between the surface to be lit and the
light emission part of the luminaire!
Do NOT discard the luminaire via normal household waste!
If you have any questions or problems in relation to installation, please call our customer service,
or send us an e-mail. Thank you!
4.
Operational conditions
Our Kermann ExProof EasyLight Z1 luminaire is designed for continuous industrial use, in areas with
explosion hazard. The designed environmental temperature range is set between -20 °C and +45 °C.
When the temperature stays below the minimum level for a longer time period, once the luminaire is
switched off, it might not always be able to be switched back on. If the temperature stays above the
maximum limit set for a longer time period, this might curtail significantly the life span of the luminaire.
For this reason, Kermann Technical Developer and Consulting Ltd. refuses to provide a Warranty for
the operation of the luminaires designed, and their useful lifetime, if they are operated on a permanent
basis at temperatures falling outside the range indicated!
Our luminaire has dust and water access protection, being IP67 rated, and secured against
mechanical impacts by solid objects as well, being IK09 rated. The robust design makes the luminaire
resistant to most environmental impacts, such as wind storms, with an appropriately designed fixture-
holder or light pole, however, natural disasters might still cause damage to it.
