Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 155 / 221
Strict confidential
4.
Installation procedure
This device must be professionally installed.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
4.1
How to open the enclosure
Before proceeding to the insertion of the USIM card and the connection of the power
supply, the enclosure has to be opened.
Note:
the lid of the enclosure must be kept opened during all the installation allowing
setting and checking all the connections. It must be closed once the installation is
completed.
4.1.1
Standard casing version
The lid tightens to the frame with 4 x M5 screws, hidden by two plastic clip-on design covers.
First, remove the two plastic clips. This can be done manually, without any particular tool:
Figure 94: Wirnet iBTS – plastic clips on the lid
The 4 x M5 screws are now accessible.
Unlock the screw with a big flat-blade screw driver (65-098 5,5x100 Stanley for instance).
Plastic clip-on (x2)
