137
Chapter 10
User Authentication
WinRoute
allows administrators to monitor connections (packet, connection, Web pages or
FTP objects and command filtering) related to each user. The username in each filtering rule
represents the IP address of the host(s) from which the user is connected (i.e. all hosts the
user is currently connected from). This implies that a user group represents all IP addresses
its members are currently connected from.
Besides access restrictions, user authentication can be used also for monitoring of their activ-
ities in the
Kerio StaR
interface (see chapter
), in logs (see chapter
), in the list of opened
connections (see chapter
) and in the overview of hosts and users (see chapter
). If
there is no user connected from a certain host, only the IP address of the host will be displayed
in the logs and statistics. In statistics, this host’s traffic will be included in the group of
not
logged in
users.
10.1 Firewall User Authentication
Any user with their own account in
WinRoute
can authenticate at the firewall (regardless their
access rights). Users can connect:
•
Manually — by opening the
WinRoute
web interface in their browser
https://server:4081/
or
http://server:4080/
(the name of the server and the port numbers are examples only — see chapter
It is also possible to authenticate for viewing of the web statistics (see chapter
) at
https://server:4081/star
or
http://server:4080/star
Note:
Login to the
Web Administration
interface at
https://server:4081/admin
or
http://server:4080/admin
is not equal to user authentication at the firewall (i.e. the user does not get authenti-
cated at the firewall by the login)!
•
Automatically — IP addresses of hosts from which they will be authenticated auto-
matically can be associated with individual users. This actually means that whenever
traffic coming from the particular host is detected,
WinRoute
assumes that it is cur-
rently used by the particular user , and the user is considered being authenticated
from the IP address. However, users may authenticate from other hosts (using the
methods described above).
IP addresses for automatic authentication can be set during definition of user account
(see chapter
).
This authentication method is not recommended for cases where hosts are used by
multiple users (user’s identity might be misused easily).
Summary of Contents for KERIO WINROUTE FIREWALL 6
