14
HOLD FUNCTION
Once the hold
key is pressed:
1) The CPU will send weight data into RS232 socket
2) The weight will remain on the display for 120 seconds
1) Place the item on the scale platform.
2) Wait for the stable indicator.
3) Press the
hold
key. The “.”
hold
indicator will turn-on.
4) Remove the item from the scale platform. The weight will remain on the display for 120 seconds.
5) Cancel the hold modus: Press the
hold
key again to cancel the “.” hold indicator and return the scale to weight value.
FUNCTION SETTINGS
1. Enter function setting mode.
Press
[ON/OFF]
to turn the power off, Press
[HOLD]
first, then press
[ON/OFF]
, while keeping
[HOLD]
pressed.
The display will show
A_ON
or
A_OFF
.
2. Selection of auto shut off mode.
When the balance enters function setting menu, the display will show
A_ON
or
A_OFF
. Press
[ZERO]
key, selec
-
tion display
A_ON
, this means auto shut off function (after 2 min.) active. Press
[ZERO]
again, the display will
show
A_OFF
, this means auto shut off function inactive.
3. Selection of auto backlight mode:
When the balance enters function setting menu press
[HOLD]
key, the display will show
L_ON
or
L_OFF
. Press
[ZERO]
key, selection display
L_ON
, this means auto backlight function is active. Press again, the display will
show
L_OFF
, this means auto backlight function is inactive.
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for several seconds after first turning the power on so that
the scale will function properly and accurately.
Error messages
EEEE: Overload
: Low battery
Weighing procedures
1. Press [ON/OFF] to turn on the scale.
When the power is turned on, all display segments appear for a few seconds and „0“ will appear on the display.
2. Select the weighing unit [UNIT].
Press [UNIT] to select a weighing unit „kg“or „lb“.
Once the unit has been selected, the selected unit will be displayed next to the weight value.
3. Start weighing
Weighing without container:
Verify the reading is „0“. If not, press
[ZERO/TARE]
to display „0“.
Place the items to be weighed on the platform.
When the reading becomes stable, the stable weighing is displayed.
Weighing with container:
Place an empty container on the platform. Wait for the stability indicator to be displayed and press
[ZERO/TARE]
.
Place the objects to be weighed in the container.
When the reading becomes stable, the stable weighing displayed.
