HSF-A 1500W 010421
3
TABLE 3. POWER SUPPLY RATINGS AND SPECIFICATIONS
CHARACTERISTIC
SPECIFICATION
CONDITION/NOTES
Input Voltage
Range: 90-264V a-c, 127-370V d-c
Up to t0% derating between 90 and 100V a-c
Input Source Frequency
Range: 57-63 Hz
Input Current:
115V a-c 18A
Maximum Load At 25°C
with Nominal Output Voltage
230V a-c 9A
Input Protection
The internal power supply is protected against shorts by an input fuse.
Input Surge cold start,
115V a-c 30A
Maximum Load At 25°C
with Nominal Output Voltage
inrush current
230V a-c 40A
Leakage Current:
<2.5mA
240V a-c
Power Factor,
115V a-c 0.99
230V a-c 0.95
Voltage Stabilization
Source Effect ±1%
Load Effect ±1%
Temperature Effect ±0.02% / °C
Combined Effect ±1.6% Typical, ±3.2% Maximum
Source, Load and Temperature
Start-up Time
800 msec
Output Hold-up Time
14 msec
230V a-c at full load
Protection
Overvoltage Variable OVP, 120 ± 7%, refer to VSET vs OVP curve Figure 2.
Protection type: Latch style, recovery after AC power cycle or inhibit
Overload 105% rated output power , protection type: constant current limit
Overtemperature 85 ± 5ºC detected on NTC Auto recovery after temperature goes down
Auxiliary Power
Sele5V I 0.5A or +9V I 0.lA.
auxiliary output
Remote ON/OFF Control
By external switch
Power OK signal
Open drain signal low when PSU turns on,
Max. sink current 20mA, Max. drain voltage: 40V.
Parallel Current Share
When connected In parallel, only one unit will operate if the total output load is less than
5% of the rated power.
Temperature
Operating: -25 to +60°·C
Storage: -40 to +85°·C
Refer to power rating curve, Figure 3.
Humidity
Operating: 20 -90% RH
Storage: 10 to 95% RH
non-condensing
Vibration
10 -500Hz, 2G 10min./1cyc1e, period
for 60min. each along X, Y. Z axes
Compliance to IEC 68-2-6, IEC 68-2-84
Safety Standards
Certified UL 60950-1; EN 60950-1
Withstand Voltage ,
input to output 3KV a-c (4,242V d-c)
input to ground 1.5KV a-c (2,121V d-c)
output to ground 0.5KV a-c (707V d-c)
Isolation Resistance ,
input to output 100M Ohms 1500V d-c
input to ground 100M Ohms 1500V d-c
output to ground 100M Ohms 1500V d-c
EMI Conduction and Radiation
Certified EN 55022; EN 61204-3;
EN 61000-6-3
Harmonic Current
Certified EN 81Q00.3.2; EN 61Q00.3.3
EMS Immunity
Certified EN 55024; EN6 1204-3;
EN6 1000-6-1; IEC 61000-4-2, 3, 4, 5, 6, 8,11
Mounting: Plug-in
Cooling:
Forced air flow - load/temperature controlled fan
Dimensions
5.22 in. (132.5 mm) x 4.288 in. (108.9 mm) x 16.86 in. (428.2 mm) (See Figure 4)
Weight
8.42 lbs (3.82 kg)
