062119
228-1692 REV 9
7
KEPCO, INC.
131-38 SANFORD AVENUE
FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000
FAX (718) 767-1102
www.kepcopower.com
email: [email protected]
FIGURE 2. BOP 1KW SERIES, FRONT PANEL CONTROLS AND INDICATORS
RS 232 CONNECTIONS.
Connect the BOP 1KW
to a modem using a Null Modem patch cable at the RS
232 port located on the rear panel (See Figure 3). A
Null Modem cable is not required for older MAC com-
puters with D-sub serial port in which the RXD and
TXD line transposition is accomplished via external
hardware. The default baud rate is 9600; refer to the
Operator Manual to change it.
E
N
T
E
R
