Kenyon B81201, Owner'S Manual

Page: 11 / 22

Operation
11
Safety Lock Feature
When the LOCKED LED is illuminated in the
main power control frame, the cooktop touch
control power settings can’t be adjusted from
the current setting. Pressing either the zone
power button or the master power button
however, can turn off the cooktop. The LED
arc light array will no longer illuminate when in
the lock mode. The lock feature can be
activated at any time as a safety measure,
whether the unit power is on or off.
When the unit has power the STANDBY light
will illuminate.
To unlock the cooktop, swipe the LOCK
feature with your fingertip along the gradient
surface, from the LOCK to the UNLOCK
position as indicated by the key and open
padlock graphics or touch and hold the
UNLOCK graphic for 3 seconds.
To LOCK the cooktop, swipe from the
UNLOCK to the LOCK position or touch and
hold the LOCK button for 3 seconds.
Turning On
Touch the controls firmly with the flat part of
your fingertips.
With the unit unlocked, touch the POWER
button in the main control frame. Activate
either burner by holding the burner power
button in the burner control frame for 1/2
second and choosing a cooking option below.
If a burner is not activated within 15 seconds,
the cooktop will de-power by itself.
Cooking Mode Options
The induction cooktop burners can be
independently operated by either a heating
level ranging from low to high, or by setting a
specific cooking temperature. Power sharing
between burners will take effect when both
burners are used. Refer to the Automatic
Power Sharing section of this manual on
page 12.
Heat Level Cooking Mode
With the unit power on and the burner
powered up, swipe your finger along the
temperature control arc and release at the
desired setting. The settings range from
LOW-MED-HIGH in 16 increments, as
indicated by the LED light array that
illuminates along the control sweep. Also, the
arc + and – signs can be toggled to select the
desired heat level. The LED light array will
indicate the selected setting.
The default heat level upon starting either
burner is 0. If the burner is set or remains at
0 for 10 seconds of inactivity, the burner will
de-power.
MAIN POWER
CONTROL FRAME
LOCK FEATURE
STANDBY LIGHT
INDICATES LOCKED UNIT
POWER BUTTON
MAIN POWER AND SAFETY LOCK
HOT SURFACE INDICATOR
BURNER CONTROL
FRAME
HEATING LEVEL
CONTROL SWEEP
LED LIGHT
ARRAY
+ BUTTON
- BUTTON
BURNER CONTROL FRAME
HEATING LEVEL COOKING MODE
16 LED LIGHT ARRAY
TEMPERATURE COOKING
MODE BUTTON
COOKING TEMPERATURE
READOUT
+ BUTTON
- BUTTON
BURNER CONTROL
FRAME
TEMPERATURE COOKING MODE
TEMPERATURE UNITS AND TIMERS
TEMPERATURE UNIT
SELECTOR BUTTON
MAIN POWER
CONTROL FRAME
KITCHEN AND
COOKING TIMER
6 5 4 2