22 7/8"
23 1/2"
14 1/2"
3 1/4"
1/4" Radius in corners
12 1/2"
NOTE:
When making countertop cutout,
radius
the corner of the cutout (1/4” radius is typical). This will
prevent cracking of the countertop. Follow the countertop manufacturer’s instructions regarding
the minimum corner radius and reinforcement of corners.
STEP #4
Installing the Cooktop
There are two mounting brackets supplied with the glass ceramic cooktop. These brackets are
designed to hold the cooktop firmly in place. The cooktop does not have a metal frame and
should be bedded to the countertop using a soft bedding compound that will prevent damage if
later removal for service is necessary. We recommend a very small bead of silicone sealant. If
mounting in granite countertop use only 100% silicone sealant.
Attach the two mounting brackets supplied with the KENYON cooktop (as shown) to the inside
vertical surface of the cutout. The brackets are to be mounted on opposing sides. Center the
bracket in the opening, flush with the countertop and secure with long self-tapping screws that
are provided. Position the cooktop in the cutout opening and press firmly on all sides to seal the
frame into the bedding compound. Secure the cooktop to the
brackets from underneath with the small sheet metal screws that are supplied.
BE CAREFUL NOT TO OVERTIGHTEN THE SCREWS.
7
COUNTERTOP CUTOUT DIMENSIONS
Portrait Models
B80101 & B80201
22 7/8"
12 1/2"
23 1/2"
14 1/2"
3 1/4"
1/4" radius in corners
COUNTERTOP CUTOUT DIMENSIONS
Landscape Models
B80105 & B80205
