ELECTRICAL OPERATION
Controls
are located in the rim of the frame: for alcohol burners, the controls are located in the
front of the appliance; for electric elements, the controls are located in the sides as shown below
in the figure.
WARNING: NEVER OPERATE ALCOHOL BURNER(S) AND ELECTRIC ELEMENT(S)
SIMULTANEOUSLY. THIS CAN CAUSE FIRE OR SEVERE INJURY.
OPERATION OF ELECTRIC ELEMENTS
Turn the electric control in either direction to
HIGH
,
LOW
, or any intermediate position for exact
heat desired. A Pilot Indicator Light, one for each element, stays
ON
until the electric control is
turned to the
OFF
position. When finished cooking, make sure both pilot lights are out and that
the electric controls are in the
OFF
position.
Pilot Indicator Light
Electric Element Control Wheel
Alcohol Burner
Control Wheel
Turning alcohol control
wheel to the left will
provide maximum flame
output
Turning alcohol control
wheel to the right will lower flame
output or extinguish (”snuff”)
flame
Turn Electric Control Wheel in
either direction to HIGH, LOW. or
any intermediate position for
electric element operation.
11
