11. Camera settings
(IP camera needs to connected state)
a) Preferences of the camera
i. Camera name: users can change the name or choose a default name
ii. Location: choose the Greenwich mean time
b) Camera
i. Camera: enable or disable the camera
ii. Camera off at: Scheduling the camera on/off time
c) Cloud recording (need enable the cloud service)
i. Recording: enable or disable the cloud recording
ii. Recording off at: Scheduling the recording on/off time
d) Services
i. Closeli plan: Your cloud service plan status. If expired, you can select
the plan here and it will forward to the online billing website
e) General settings
i. Notification settings
●
Motion detection: Enable/disable motion detection
●
Motion area settings: Drag to set an area in the grid to detect motion
To exit the app, click the mobile “Back” button and it will ask you “Are you
sure you want to exit?” Select “Exit” to quit.
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For MPE (Fixed or Mobile Device)
“FCC RF Radiation Exposure Statement Caution: To maintain compliance
with the FCC’s RF exposure guidelines, place the product at least 20cm
from nearby persons.”
10. My Cameras (main screen)
12. Account
a) After add the camera, the main screen will appear a camera screen.
b) If you can’t find it, you can slide the screen down to refresh the cameras
in your account. And you can also change the display preview window
format.
c) Press the upper left corner the “Left arrow” button, a sub menu appears.
i. My Cameras: the main screen for select the cameras which register in
this account
ii. Account: change e-mail address, password enable/disable newsletters
and log out
iii. About: Information of current version, legal notice and license
agreement
d) Click the camera picture to view the camera streaming as below.
i. Screen capture: It will store at the “DirectGear” folder in your mobile
ii. Microphone on/off: After enable it, an orange microphone icon will
appear. Click it and speak on the mobile, the IP camera speaker will
have your voice.
iii. Playback (cloud service only):
You can slide the “Playback” time to the left and it will playback the
previous video from the cloud service.
For more easy to choose the time for playback the video, you can
click the left hand side “zoom” to enlarge time bar.
To view real time video, click the “right arrow” button on the time bar.
iv. Events (cloud service only): Click on it and you can choose the
previous recorded video for playback. It will separate as motion and
sound events.
v. Favorites (cloud service only):
●
Choose and playback the saved video from the cloud service
●
Select a start time at time and events area
●
Click the cut icon.
●
The save to favorites screen will show
●
Sound detection: Enable/disable sound detection
●
Stop Notifications: Add schedule for alerts off
●
Email notifications: Send notifications to email address
ii. Detection sensitivity
●
Sound sensitivity: you can select Bam, Default and Whisper
●
Motion sensitivity: you can select Crash, Default and Tiptoe
a) Change email address: You can change the login e-mail address to a
new one
b) Change password: You can change your password
c) Log out: log out this account and back to the log in screen
13. Reset the IP camera
a) If your IP camera change to another Wi-Fi network, you should reset
the IP camera
b) To reset it, use a pencil or pen to press the “Reset button” at the
lower left corner at the back of the IP camera. Press until a “beep”
sound (around 2 seconds). The flash green light will blank. Wait until
it flash again and repeat the “Add camera” steps.
iii. Video quality: User can choose High, Medium and Low video quality
iv. Camera microphone:
●
Camera microphone: Enable/disable sound to be detected and
recorded
●
Turn camera microphone off at: Scheduling the microphone on/off
time
f ) Hardware
i. Rotate image 180o: Enable to upside down the video screen
g) Details
i. Wi-Fi network: You can change connect to another Wi-Fi network
ii. Camera details: Device name, Time zone, Firmware, Device ID and
Mac address
h) Remove Camera
This will remove the camera from your account. Warning:
(All associated recordings will be deleted and non-reversible).
If you want add this camera to another account, you must remove the
camera.
Camera name
Date and time
Sound on/off
Time
Events
Day
Microphone
on/off
Camera settings
Full screen
display
Playback time
Plan
Favorites
Screen capture
Time and events
area
●
You can change the title name and duration.
●
Click upper right corner “Save” to complete
●
It will appear at the Favorites folder, to playback, just click it.
●
To download the video to your mobile, click “Save” in the playback
screen of the video
vi. Plan (cloud service only): Your account existing cloud service plan
14. Exit
15. Package Contents
Reset
IP Cloud Camera
USB cable
A/C adaptor
Wall mount
User manual
Quick install guide
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.