22
EN
RECORDING
(TAPE B only)
Recording from the built-in radio
1
Tune in to the desired station. (see pages 18 -
20)
2
Load a cassette into the TAPE B cassette com-
partment.
3
Press the REC PAUSE button
•
“REC.” and “
¶ 2 3
” will flash.
4
Press the
2
or
3
button.
•
“REC.” will disappear and “
¶ 2
or
¶ 3
” will
light up.
Note :
• If a whistling noise is heard whilst recording from
an AM station, move the AM loop antenna to a
position where noise is no longer heard from
the unit.
To stop recording :
Press the
7
STOP button.
Recording from the built-in CD player
(CD Synchronised Recroding System)
1
Press the POWER / ON/STANDBY button to turn
the power on.
2
Press the CD button and load the desired disc.
•
Use the program playback function to store the
tracks you want to record in memory. (see page
17)
3
Load a cassette into the TAPE B cassette com-
partment.
4
Press the REC PAUSE button.
•
“SYNC.” and “
¶ 2 3
” will flash.
5
Press the
2
or
3
button.
•
“SYNC.” will disappear and “
¶ 2
or
¶ 3
” will
light up.
•
CD playback will start approximately 5 seconds
after the tape starts
To stop recording
Press the
7
STOP button.
The CD and tape will stop.
•
When recording important selections, be sure to make a preliminary test to ensure that the desired
material is being properly recorded.
•
The volume and sound quality can be adjusted with no effect on the recorded signals (Variable Sound
Monitor).
•
Metal and CrO
2
tapes should not be used for recording or dubbing.
5
2
4
3
1
7
STOP
2
3
4
7
STOP