Kenwood XD-980MD Instruction Manual Download

Page: 27 / 80

XD-980MD (En)

2 7

Preparation section

Basic

section

Application section

Knowledge sections

Let's put out some sound

Pause the recording

Press the key again to resume recording. At this time, the track
number is incremented by “1”.

Recording can also be started by pressing the record (

REC

) key.

Stop the recording

Adjust the recording level

(only analog recording)

Play the source to be recorded.

Set to recording pause.
Always press the record (

REC) key

in stopped condition, and then press
the pause (

) key.

Press the MODE key and select the
MD recording level (REC).

Adjust the recording level.

Adjustment is possible in the range from 0 to
80.

Adjust so that 0 dB lights only once in a while.

Lower the level when the red part of the level
meter lights.

“WRITING” displayed during the minidisc ejection operation indicates that the data
associated with recording or editing is being written on the disc. Do not apply vibra-
tion or shock to the unit while this message is displayed.

Start recording.

Press the record (

REC) key.

Play the music source to be recorded.

In regard to display messages

Recording is not possible when one of the following messages
is displayed.

“DISC FULL”

: The minidisc is full.

Erase unrequired tracks.

“PROTECTED”

: The write protect tab is open.

Close it.

“PLAY ONLY”

: The minidisc is only for playback.

Insert a recordable disc.

@ @

R E C 6 3

BASS

MULTI CONTROL

/VOLUME

0 : 0 0

(

−

dB)

∞

30 10 5

Level increases

Level decreases

REC

Remove the minidisc after the end of recording.

Always remove the minidisc after recording.

During recording, the eject (

) key will not be

accepted.

To start recording simultaneously with CD play-
back, please read ”Tips for recording from a
CD“.

•

Level value

0dB

Display on the MD
recorder section

Display on the amplifier,
tuner section

Switching is done each time the MODE key is pressed.

Strength of the SRS 3D effect (LEVEL)

Left-right sound balance

MD recording level (REC)

Volume from external equipment connected to the AUX terminal (INPUT)

Normal volume adjustment (VOL)

Let's recording

Summary of Contents for XD-980MD

















































































Search results

Summary of Contents for XD-980MD

Reviews:

Related manuals for XD-980MD

Brands by name

Popular brands

Kenwood XD-980MD, Instruction Manual

Search results

Summary of Contents for XD-980MD

Reviews:

Related manuals for XD-980MD

Brands by name

Popular brands