RD-VH7/X-VH7 (EN)
51
Timer operation
÷
To listen to CD
÷
To listen to tape
Program timer playback (AI timer playback) and timer recording
Two timer programs (PROG.1, PROG.2) are available. Both of them are 24-hour timer programs which can
be executed every day.
Each of timer reservation programs PROG.1 and PROG.2 can store the time zone and contents of timer
operation, which can be executed or deactivated as required.
1
Select the source to be played (recorded) and adjust its playback volume.
The station should be preset
prior.
›
Insert a disc.
(Program playback is not possi-
ble.)
§
2
Select the timer reservation mode.
÷
If you make a mistake in the middle, press the
“mode”
key to cancel the operation and restart it from step
2
.
÷
When a timer reservation already has been made, the
contents will change to the new settings.
Be sure to adjust the clock before setting the timer.
¡
Make preparations for record-
ing.
r
,
t
Steps
1
to
4
For recording and playback with an MD recorder (DM-VH7), also refer to the
instruction manual enclosed with the DM-VH7.
Adjust the clock before setting the timer.
÷
To listen to MD
÷
For recording
Set a tape into deck.
‚
Set a disc into the MD recorder.
÷
To listen to radio
÷
To record a digitally broadcast CS or BS program, connect the analog input from source to the AUX jacks. (Only the
analog input can be recorded.)
÷
It is possible to execute both timer reservation programs PROG.1 and PROG.2 simultaneously.
÷
The time zones of PROG.1 and PROG.2 should be set by reserving an interval of 1 minute or more so that they are not
overlapped.
1
Press the “mode” key.
2
Rotate the “multi control” knob to select
“TIMER SET ?”, then press the “enter” key.
3
Rotate the “multi control” knob to select
“PROG.1 SET ?”, then press the “enter” key.
2
Timer setting selection
multi control
\
\
enter
TIMER
TSET?
TIMER
SET
T
?
PROG.1
SET?
EEEEE
SET
T
?
Blinks
Blinks
Example for playing radio broadcast from 10:30am
to 11:30am using PROG.1
TIMER OPERATIONS
÷
Recording or playing the AUX
source component
For timer playback or timer re-
cording of a source component
connected to the AUX jacks,
connect it properly by referring
to “Connection of audio cord”.
#
3
PROG.1 selection
Continued on next page
