ADJUST TO MOST SUITABLE
DIRECTION BY HAND
ANTENNA MUST NOT DROOP
(DIAGRAM 6)
the corners of the room.
Do not line it up together with the antenna
cord as it will affect sensitivity.
NOTE:
When you listen to an AM broadcast (medium wave and shortwave)
using a short antenna, sensitivity is sharper without ground connection.
3.
Player Connections (See Diagram 1)
(In the case of stereo pickups)
Crystal Pickup: Connect the set of two lead wires from the player to
the terminals marked "XTAL".
Magnetic Pickup: Connect the set of two lead wires from the player
to the terminals marked "MAG".
4. Tape Recorder Connections (See Diagram 1)
(Tape Recorder Equipped with RP Cord)
If you use a tape recorder equipped with a RP cord, you can reproduce
stereo recording merely by plugging the cord into the socket provided
for this purpose.
(Recording with a tape recorder)
Connect the lead lines from the
LINE IMPUT terminals of the tape
recorder to the terminals marked
"TAPE REC".
In the case of
monaural recording, either one (top
or bottom) of the terminals may be
used.
(Playback of tape recorder)
Connect the lead line from the
LINE OUTPUT terminals of the
tape recorder to the terminals
marked "AUX" on the amplifier.
In the case of monaural reproduc
tion, either terminals may be used.
5
FM Stereo Broadcast
The W
-38
provides Receptacles for
a FM stereo adaptor so that you
may listen to FM stereo broadcasts
by simply connecting the adaptor
additionaly with this amplifier.
5
VINYL LINE
TYPE W-38
STEREO
AMPLIFIER
SOLDER
TOGETHER
GROUND
GROUND BAR
!COPPER BAR OR
3
mm
SIZE WIRE
1
METER LONG)
(DIAGRAM 7)
www.hifiengine.com
Summary of Contents for W-38
Page 12: ...www hifiengine com ...
