VR-606/616
29
SPECIFICATIONS
AUDIO section
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels dri-
ven, at 8
Ω
from 40 Hz to 20 kHz with no more than 0.7%
total harmonic distortion. (FTC)
Effective power output during SURROUND operation
FRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8
Ω
one channel
driven) ......................................................100 W + 100 W
CENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8
Ω
one channel
driven).....................................................................100 W
SURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8
Ω
one
channel driven).........................................100 W + 100 W
SUBWOOFER (80 Hz, 0.7% T.H.D. at 8
Ω
one channel
driven) (VR-616) .....................................................100 W
Total harmonic distortion.................0.05% (1 kHz, 50 W, 8
Ω
)
Frequency response
CD ..................................20 Hz ~ 70 kHz, +0 dB, -3.0 dB
Signal to noise ratio (IHF'66)
CD............................................................................95 dB
Input sensitivity / impedance
CD ............................................................550 mV / 47 k
Ω
DVD/6CH INPUT .....................................550 mV / 47 k
Ω
Output level / impedance
TAPE REC .................................................550 mV / 1 k
Ω
PRE OUT (SUBWOOFER) (VR-606) .........1.5 V / 2.2 k
Ω
Tone control
BASS ..................................................±10 dB (at 100 Hz)
TREBLE ..............................................±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level........................+8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency ..........32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ..................(-15 dBm ~ -21 dBm), 660 nm ±30 nm
Coaxial......................................................0.5 Vp-p / 75
Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite)......................................1 Vp-p / 75
Ω
S VIDEO inputs / outputs
S VIDEO (luminance signal) ........................1 Vp-p / 75
Ω
S VIDEO (chrominance signal).............0.286 Vp-p / 75
Ω
FM tuner section
Tuning frequency range .....................87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
......1.3 µV (75
Ω
)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO .......................................28 µV (75
Ω
)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO .............................................0.5% (71.2 dBf input)
STEREO..........................................0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO ............................................75 dB (71.2 dBf input)
STEREO ........................................68 dB (71.2 dBf input)
Stereo separation (1 kHz) ............................................40 dB
Selectivity (±400 kHz)....................................................70 dB
Frequency response .......(30 Hz ~ 15kHz), +0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range
10 kHz step......................................530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod., S/N 20dB).16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input) .................50 dB
GENERAL
Power consumption ........................................................2.2 A
AC outlet
SWITCHED .............................(total 150 W, 1.25 A max.)
Dimensions.......................................W: 440 mm (17-5/16")
H: 143 mm (5-5/8")
D: 303 mm (11-15/16")
Weight (Net)..................................................7.7 kg (17.00 lb)
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
