Kenwood VR-5900 Sovereign User Manual Download Page 33

Page: 33 / 118

Using P

erT

ouch

How Do I Adjust the Surround?

THX Sur EX ON

The input signal is decoded automatically into 6.1-channel signals
if the input signal is Dolby Digital or DTS and contains two differ-
ent types of surround channel signals.

The THX function is activated.

THX Sur EX AUTO

The input signal is decoded into 6.1-channel signals only when the
input contains the Dolby Digital Surround EX encoded identifica-
tion signal.

The THX function is activated

THX ON

The THX operation is activated. (6.1channel decoding will not be
applied.)

THX OFF

The THX Surround EX and THX operations are deactivated.

When playing

Dolby Digital Surround EX

-encoded software in 6.1 chan-

nels, it is required to set the

THX Surround EX

mode to On or Auto.

Note that some of

Dolby Digital Surround EX

-encoded software does

not contain the identification signal. In this case, set the

THX Sur EX

mode to On.

Set the

THX

mode to Off when

DTS-ES

decoding is required.

The

THX

operation is not activated with the 96 k fs PCM signal.

Summary of Contents for VR-5900 Sovereign























































































































Search results

Summary of Contents for VR-5900 Sovereign

Reviews:

Brands by name

Popular brands

Kenwood VR-5900 Sovereign, User Manual

Search results

Summary of Contents for VR-5900 Sovereign

Reviews:

Brands by name

Popular brands