Kenwood VR-510 Instruction Manual Download Page 41

Page: 41 / 52

Remote Control

From the remote control unit of the other source, press the key
that you want to store.

• When it takes for more than 5 seconds or the remote control unit does

not receive the remote control code well, “

Error

” appears in the

display. In this case, re-operate from step

The remote control code is stored on the key of the remote
control unit.

To delete the memory stored on the key

Press the display operation 1 [Clr] key in step

. “

Cleared

”

appears in the display.
The memory previously stored is cleared.

To operate other components

Press the MUSIC, MOVIE, or TV key to select the desired input
source.

Press the desired key.

Point the infrared ray system part of the other remote control
unit to the remote sensor of the remote control unit .

Storing on the memory

Press the MUSIC, MOVIE, or TV key to select the input of the
desired remote control unit.

You can store on the remote control unit up to 5 memories.

VCR

Video1:

Selected input

Press the LEARN key.

• The Extend selecting display appears.

Extend2

Extend1

Home Enter

Infrared ray system part

Remote control

unit of the other

source.

—

>Extend1

Complete

• When the setup code is not registered, any messages do not appear.

When the setup code is registered

Press the

∞

keys to select the location.

•

Extend1

–

Extend5

are available.

Press the display operation 2 [Enter] key.

• The remote control is sent for receiving the remote control code.

>Extend1

Waiting

Clr Exit

From the remote control unit of the other source, press the key
that you want to store.

• The remote code is sent to the remote control unit.
• “

Complete

” appears when finished.

• When it takes for more than 5 seconds or the remote control unit does

not receive the remote control code well, “

Error

” appears in the

display. In this case, start from the step

again.

The remote control code is stored on the memory (Extend1 –
Extend5) of the remote control unit.

To operate other components by using the stored memory

Press the display operation 2 [Menu] key during “

” ap-

pears in the display.

• The Menu display appears.

Press the

∞

keys to select the memory you want to operate.

Press the display operation 2 [Enter] key.

To delete the stored memory

Press the display operation 1 [Clr] key in step

. “

Cleared

”

appears in the display and the memory that is selected in step

is erased.

Press the MUSIC, MOVIE, or TV key to select desired input
source.

Extend1

Complete

Extend 1

You can restore the setup codes or memories to their original default
settings.

• “

Cleared

” appears in the display, and the remote settings return to

their original default settings.

Insert the batteries while pressing and holding the

key

and

key.

Restoring the original factory settings

Remote control operations

• The remote code is sent to the remote control unit.
• “

Complete

” appears when finished.

• To maintain the memory settings, complete the battery replacement

operation approximately within 10 minutes.

*510/40-52/EN

3/15/01, 12:00 PM

Summary of Contents for VR-510





















































Search results

Summary of Contents for VR-510

Reviews:

Related manuals for VR-510

Brands by name

Popular brands

Kenwood VR-510, Instruction Manual

Search results

Summary of Contents for VR-510

Reviews:

Related manuals for VR-510

Brands by name

Popular brands