Kenwood UBZ-LJ8 Instruction Manual Download Page 5

Page: 5 / 30

ORIENTATION

key

VOL

control

MIC

jacks

Microphone

Power switch

Antenna

Display

PTT

switch

▲

key

▼

key

Speaker

ONTROL

UNCTIONS

PTT (Push-to Talk) switch:

Press this switch then speak into

the microphone to make a call. Release the switch to receive.

▲

key:

Press to increase the channel or group mode

number, and to turn selected functions ON or OFF.

▼

key:

Press to decrease the channel or group mode

number, and to turn selected functions ON or OFF.

VOL control:

Rotate to adjust the volume level.

Power switch:

Press and hold to turn the transceiver power

ON or OFF. With the power ON, press momentarily to enter
the Loud Function setting.

key:

Press momentarily to enter the Group Mode setting.

Press momentarily again to enter the Secret Mode setting.
Press a third time to return to normal. Press and hold to lock
the transceiver controls.

Summary of Contents for UBZ-LJ8































Search results

Summary of Contents for UBZ-LJ8

Reviews:

Related manuals for UBZ-LJ8

Brands by name

Popular brands

Kenwood UBZ-LJ8, Instruction Manual

Search results

Summary of Contents for UBZ-LJ8

Reviews:

Related manuals for UBZ-LJ8

Brands by name

Popular brands