ALIGNMENT SETTINGS
(The figures below are nominal and used for representative purposes only.)
To access Service Mode select program position 99 and set sharpness to minimum.
Press “
MUTE
” button on remote control and at the same time press the "
∨
" button on the customer controls at the front of
the TV, this will place the TV set into Service Mode1.
Press
∧
/
∨
buttons to step up / down through the functions.
Press
+ / -
buttons to alter the function values.
Press “
STR
” button on the customer controls at the front of the TV after each adjustment has been made to store the
required values.
To exit Service Mode press “
N
” button.
Alignment Function
Setting indication
Note
: All setting values are approximate
Settings / Special features
EAROM copy
TV/EXT
---
UG2
LED ON/OFF
LED to be just ON
Verical Slope
V-SLO
031
Optimum setting.
Vertical Position
V-POS
037
Optimum setting.
Vertical Amplitude
V-AMP
022
Optimum setting.
Horizontal Shift
H-CTR
038
Optimum setting.
R-CUT
R-CUT
022
Optimum setting.
G-CUT
G-CUT
036
Optimum setting.
R-Drive
R-DRV
040
Optimum setting.
G-Drive
G-DRV
030
Optimum setting.
B-Drive
B-DRV
31
Optimum setting.
AGC
AGC
018
Optimum setting.
Sub Colour
S-COL
28
Optimum setting.
Sub Brightness
S-BRI
022
Optimum setting.
6
Summary of Contents for TX-21AP2D
Page 5: ...5 WAVEFORM PATERN TABLE CONDITIONS Contrast MAX Brightness MID Colour MID Sharpness MID ...
Page 19: ......
Page 20: ......