28
6 ENHANCED COMMUNICATIONS
CROSS TONE
Use this feature when using different uplink and
downlink tones to access a repeater. You can set a
transmission Tone frequency and reception CTCSS
frequency to different frequencies.
To set the transmission tone:
1
Press
[A/B (A=B)]
to select VFO A or VFO B.
2
Select your desired transmission frequency.
3
Press
[FM/AM (FM-N)]
to select FM.
4
Press
[AGC/T (SEL)]
until “ ” appears.
5
Press and hold
[AGC/T (SEL)]
, then turn the
MULTI/CH
control to select your desired Tone
frequency.
6
Press and hold
[AGC/T (SEL)]
or press
[CLR]
to
complete the setting.
To set the reception tone:
1
Press
[A/B (A=B)]
to select the other VFO.
2
Select your desired reception frequency.
3
Press
[FM/AM (FM-N)]
to select FM.
4
Press
[AGC/T (SEL)]
until “
” appears.
5
Press and hold
[AGC/T (SEL)]
, then turn the
MULTI/CH
control to select your desired CTCSS
frequency.
6
Press and hold
[AGC/T (SEL)]
or press
[CLR]
to
complete the setting.
To set the Cross tone:
1
Press
[SPLIT]
.
• “SPLIT” appears on the display.
2
Press
[AGC/T (SEL)]
until “
” appears.
Note:
hen the cross tone function is ON, the Tone and CTCSS
frequency cannot be changed. To change the Tone or CTCSS
frequency, press
[AGC/T (SEL)]
to turn Tone or CTCSS ON,
then change the setting.