12
4
■
Setting Date
1 Press [MNU] to enter Menu mode.
2 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select “RADIO (1–)”, then press
[OK].
3 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select “TNC (1–6–)”, then press
[OK].
4 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select Menu 1–6–4 (DATE),
then press [OK].
•
The first 2 digits blink.
5 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to enter the current month (U.S.A./
Canada) or day, then press [OK].
•
The next 2 digits blink.
6 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to enter the current day (U.S.A./
Canada) or month, then press [OK].
•
The last 2 digits blink.
7 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to enter the current year, then
press [OK].
8 Press [MNU] to exit Menu mode.
Note:
◆
If you disconnect and reconnect the flexible cable between the radio
and TNC boards to replace the lithium battery, be sure to reset the
clock IC. Press [REV]+[LOW]+ POWER ON.
◆
When used at room temperature (25
°
C), the error of the internal
clock in a month is within one minute.
◆
The internal clock is effective until December 31, 2098.
ADJUSTING THE INTERNAL CLOCK
This transceiver has a clock to manage information on
when APRS packets are received. Use Menu Set-up to
correct the current time, date, and if necessary the UTC
offset; UTC stands for Universal Time Coordinated.
■
Setting Time
1 Press [MNU] to enter Menu mode.
2 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select “RADIO (1–)”, then press
[OK].
3 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select “TNC (1–6–)”, then press
[OK].
4 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to select Menu 1–6–3 (TIME), then
press [OK].
• The first 2 digits blink.
5 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to enter the current hour, then
press [OK].
• To set 1 o'clock PM for example, select 13.
• The next 2 digits blink.
6 Press [
c
c
c
c
c
]/ [
d
d
d
d
d
] to enter the current minute, then
press [OK].
7 Press [MNU] to exit Menu mode.
Summary of Contents for TM-D700A
Page 55: ......
