50
10
DUAL TONE MULTI-FREQUENCY (DTMF) FUNCTIONS
This transceiver provides you with 10 dedicated DTMF
Memory Channels. You can store a DTMF number (16
digits max.) in each of these channels to recall later for
speed dialing.
Many repeaters in the U.S.A. and Canada offer a service
called Autopatch. You can access the public telephone
network via such a repeater by sending DTMF tones. For
further information, consult your local repeater reference.
MANUAL DIALING
The keys on the Mic keypad function as DTMF keys;
the 12 keys found on a push-button telephone plus 4
additional keys (A, B, C, D).
To perform Manual Dialing, follow the steps below.
1
Press and hold Mic
[PTT]
to transmit.
2
While transmitting, press the keys in sequence on the
keypad, to send the DTMF tones.
• The corresponding DTMF tones are transmitted.
1
2
3
A
4
5
6
B
7
8
9
C
0
#
D
Freq. (Hz)
697
1209
1336
1477
1633
770
852
941
• When DTMF TX Hold is activated {page 51}, you do
not need to continuously press Mic
[PTT]
to remain
in transmission mode. However, transmission mode
is retained for only 2 seconds after pressing a key, so
if the next key is not pressed within this time limit, the
transceiver stops transmitting.
DTMF M
ONITOR
When pressing the Mic DTMF keys, you will not hear
DTMF tones emitted from the speaker. However, you
can monitor the DTMF tones if desired.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 33 (DT.M).
2
Press
[MENU]
and turn the
Tuning
control to select
“ON” or “OFF” (default).
3
Press
[MENU]
to store the setting or any other key to
cancel.
4
Press any key other than
[MENU]
to exit Menu Mode.
