16
■
Transmitting
1
Select your desired system and group (or group and channel).
2
Press the
A
key to enter Selcall Mode.
3
Use the / keys (right side keys only) to select the ID of the station
you want to call.
• You can also enter digits by using the microphone keypad if Manual Dial is
enabled. (Press
to erase an incorrect digit.)
4
Press the
A
or
#
key to enter Status Mode.
5
Use the / keys (right side keys only) to select the status you want to
transmit.
• You can also enter digits by using the microphone keypad if Manual Dial is
enabled. (Press
to erase an incorrect digit.)
6
Press the
PTT
switch to initiate the Status call.
• “COMPLETE” is displayed when the call has been successfully transmitted.
■
Receiving
The mail icon ( ) will flash and a calling ID or text message will appear
when a Status call is received.
• The display alternates between the caller ID and the message.
Press any key to return to Normal Operation Mode.
■
Reviewing Messages in the Stack Memory
1
Press and hold the
A
key for more than 1 second to enter Stack Mode.
• The last received message is displayed with the message number. “S” (Status)
appears with the number.
2
Use the / keys (right side keys only) to select the message you
want to view (if more than one message is stored in the stack memory).
3
Press the
p
p
p
p
p
C
or
D
o
o
o
o
o
key to stop the message from auto-scrolling if
desired. Also use these keys to scroll through the message manually.
4
Press the
SCN
key to toggle between the message and the caller’s ID.
5
To erase the message, press and hold the
SCN
key for more than
1 second.
■
Automatic Status Response
If you pre-select a status number and then leave the transceiver in Status
Mode, the transceiver will automatically respond with that status number
when a request from the base station is received. (The base station request
function is optional.)
