9
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
Kenwood
Corporation.
Note:
If set up by your dealer, your transceiver may use the MDC-200 feature in place of
FleetSync. MDC-200 and FleetSync cannot be operated simultaniously.
S
elcAll
(S
electiVe
c
Alling
)
A Selcall is a voice call to a particular station or to a group of stations.
n
Transmitting
1
Select your desired zone and channel.
2
Press the
<B
and
C>
keys to select the ID of the station you want to call, or
enter a station ID using a DTMF keypad.
3
Press the microphone
PTT
switch and begin your conversation.
n
Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when
a Selcall has been received.
To respond to the call, press the
PTT
switch and speak into the microphone.
n
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
Note:
The ID range may be limited by programming.
p
Aging
c
All
1
Select your desired zone and channel.
2
Press and hold the key programmed as
Paging Call
for second to transmit
your PTT List ID, to request a call.
S
tAtuS
m
eSSAge
You can transmit pre-programmed status messages by pressing the keys
programmed as
Status 1
and
Status 2
.
Status messages are 2-digit codes ranging from 0 to 99 (80 ~ 99 are reserved
for special messages), containing messages of up to 6 alphanumeric characters.
gpS r
eport
If a GPS unit (NMEA-083 format) is installed on your transceiver, you can press
the key programmed as
Send the GPS data
to send your location data.
Summary of Contents for TK-7302H
Page 17: ......
