5
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Press
to switch the transceiver ON.
• A beep sounds and the display illuminates.
• If the Transceiver Password function is programmed, “PS” will appear on the display
when the power is turned ON. Refer to “Transceiver Password”, below.
Press
again to switch the transceiver OFF.
■
Transceiver Password
To enter the password:
1
Press / to select a digit.
• When using a keypad, simply enter the password digits and proceed to step 3.
2
Press
C>
to accept the entered digit and move to the next digit.
• Press
A
or
#
to delete an incorrect digit. Press and hold
A
or
#
to delete all
digits.
• Repeat steps 1 and 2 to enter the entire password.
3
Press
S
or to confirm the password.
• If you enter an incorrect password, the transceiver remains locked.
A
DJUSTING
THE
V
OLUME
Press the
Volume Up
key to increase the volume. Press the
Volume Down
key
to decrease the volume.
If Squelch Off has been programmed onto a key, you can use that function to
listen to background noise while adjusting the volume level.
S
ELECTING
A
Z
ONE
AND
C
HANNEL
Select the desired zone and channel using the keys programmed as
Zone Up
/
Zone Down
and
Channel Up
/
Channel Down
.
• “G1” (Zone 1) appears on the display.
T
RANSMITTING
/ R
ECEIVING
1
Select your desired zone and channel.
• In Voting and Voting with Signaling zones, the channel is selected automatically.
2
Press
microphone
PTT
switch and speak into the microphone to transmit.
Release the
PTT
switch to receive.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
