22
PROGRAMMABLE FUNCTIONS
Calling Alert
Calling alert tones help identify yourself to party members and inform them that you
are calling. Your dealer can set up your transceiver with 1 of 10 calling alert tones. If
each party member uses a different tone, it is easy to know who is calling. To make
a call, press the button programmed as Calling Alert.
Button Lock
Press and hold this button for 2 seconds to lock/ unlock the transceiver buttons and
Selector
*
.
The following buttons/ functions can still be used when Button Lock is active:
Button Lock, Monitor, Monitor Momentary, Squelch Off, and Squelch Off
Momentary.
Note:
◆
*
To lock the Selector is supported from firmware version 1.20 / serial number
C0910941 or later.
Monitor
In Digital mode, press this button to deactivate Common ID signaling. Press the
button again to return to normal operation. Squelch will open with any dPMR446
signals received regardless of the Common ID settings.
In Analogue mode, press this button to deactivate QT or DQT signaling. Press the
button again to return to normal operation.
Monitor Momentary
In Digital mode, press and hold this button to deactivate Common ID signaling.
Release the button to return to normal operation. Squelch will open with any
dPMR446 signals received regardless of the Common ID settings.
In Analogue mode, press and hold this button to deactivate QT or DQT signaling.
Release the button to return to normal operation.
Summary of Contents for TK-3701D-E
Page 1: ...USER MANUAL TK 3701D B5A 3234 00 01_EN ...
Page 31: ... 2020 ...
