29
4
Press
[PTT]
+
[MR]
.
• The transmission frequency is stored in the memory channel.
Note:
When you recall an odd-split memory channel, “ ” and “ ”
appear on the display. To confirm the transmission frequency, press
[F]
,
[7]
(Reverse function).
C
oNtiNuously
s
toriNg
iN
s
implex
or
s
plit
C
haNNels
Using the following procedure will be easier to sequentially store
frequencies and related data in more than one simplex or split
memory channel.
1
Press
[PTT]
+
[MON]
+
Power ON
to enter Memory Storage
mode.
2
Press
[ ]
, then rotate the
Selector
(or press
[UP
]/
[DOWN]
) to
select the desired frequency and select related data as required
(Tone, CTCSS, DTSS, etc.).
• Pressing
[ ]
toggles frequency select (the MHz dot blinks) or
channel select (the channel number blinks).
3
Press
[ ]
again, then rotate the
Selector
(or press
[UP
]/
[DOWN]
) to select the desired memory channel.
4
Press
[MR]
.
• The selected frequency and related data are stored in
the memory channel, and the memory channel number is
incremented.
5
Turn the transceiver power OFF, then ON to exit Memory
Storage mode.
