Q.
Is the TH-22AT Mars/Cap capable?
A.
Yes, but the information will only be furnished with a copy of your Mars/Cap license.
TH-G71A Quick Start
1.
Entering Frequency
a)
Press band
b)
Press VFO
c)
Select frequency by using the dial knob or entering the frequency on the keyboard
d)
Select shift by pressing F then press SHIFT(REV) until desired shift appears.
2.
Select Tone
q)
Press F then press TONE (LOW) T should appear on display
r)
Press F then tone SEL (9)
s)
Using the dial knob select tone frequency
t)
Press VFO
3.
Memory Entry
a)
Press F
b)
Select memory number using dial knob
c)
Press M.IN (MR) to store
4.
Recall Memory
q)
Press MR
r)
Select Memory number using the dial knob
TH-G71A FAQ
A.
What is the frequency range of the receiver?
Q.
118-174, 320-470, 800-824, 849-869, 894-950
A.
Can the TH-G71A be PC programmed?
Q.
Yes, the TH-G71A can be programmed using the PG-4P cable. The software for
uploading/downloading channel information. It is free on our web page at
www.kenwood.net
A.
My speaker microphone does not work on the TH-G71A?
A.
Make sure that menu 15 (TC) transceiver control is turned off.
A.
When using the MCP-G71 software I get a time out error?
A.
Make sure that the PG-4P cable is connected to COM 1 or COM 2. If your computer uses a
DB-9 for COM 1 OR COM 2, you will need to use an adapter from the PG-4P to your
COM Port. Use the Radio Shack adapter #26-269. Menu 15 must be turned on before
uploading downloading information from the radio.
Q.
How do you reset partial/reset?
A.
Partial reset with radio off hold VFO key. Turn radio on, display will show VFRST? Push
VFO again for full reset. With the radio off hold F key turn radio on display will show
ALRST, push F again
Q.
Is the TH-G71A capable of Mars/Cap?
