Kenwood TAJFUN 1000, Instruction Manual

Page: 3 / 10

________________________________________________________________________________
Page 3 of 10
VH Electronics Slovakia www.vhelectronics.sk
I.3 Protection, measurements and display
 Protection PWR, REF, Temperature, Imax, Umax/Umin
 Control / Display Colour TFT display
 Measurements and display:
o
Drain Current
o DC Voltage
o Output Power PWR
o Reflected Power REF
o
Peak Power PEP
o
Temperature
I.4 Put into operation
If your device was transported or stored in a cool or cold environment, it is necessary to unzip it
first and let it dry in a warm enviroment (by doing this you will protect your device against a
possible water condensation). Then you should connect the connecting coaxial cable to the RF
INPUT and RF OUTPUT jacks on the rear panel (N-female connector) and attach the PTT RCA
(CINCH) connector. Broadcasting (Tx) is active when connected to GND.
Back panel