RXD-501/551/571/A5/701/751/771/A8
4
DISASSEMBLY FOR REPAIR
1. How to remove the front panel.
(1) Turn the power ON and then push the open/close
key to open the tray.
(2) After removed the tray cover, push the open/close
key to close the tray and then turn the power
OFF.
(3) Remove the push rivet (
1
) and 4 screws (
2
,
3
).
(4) The front panel can be separated by removing the
3 screws (
4
) located at the bottom plate of the
front panel.
2. How to remove the CD mechanism
(1) Remove 4 screws (
5
) on the left side/right side of
chassis.
(2) Remove 2 screws (
6
) and the cap (
7
) on the
rear panel.
(3) Disengage the CD mechanism as FIG.2.
3. How to open the tray if not comes out.
(1) From the rear side of the CD mechanism, use a
screw driver or the like to turn the friction arm fully
counterclockwise.
(2) Pull out the tray front wards by hand when the
tray comes just out.
* As for details of items in the below, refer to RXD-F3
service manual (B51-5091-00).
(1) How to detach the tray.
(2) How to attach the tray.
(3) Replacing the pickup.
Fig.1
5
2
3
3
3
1
6
6
7
x4
4
x3
REAR
SIDE
Friction
Arm
Fig.2
RXD-501~751(K)
COVER(
98.4.23
21:43
y [ W
7
