background image

5

 EN

RFU-6100  5492/01-08/EN

1 Connect your Surround Speaker with the corresponding color terminals on the Wireless Receiver (RFU-R6100).

(Right: Gray, Left: Blue)

2 Connect the Wireless Receiver (RFU-R6100) power cord to your power supply.

• The Wireless Receiver (RFU-R6100) power indicator lights up green.

3 Connect the AC adapter to the Wireless Transmitter (RFU-T6100) and power supply.

4 Make sure you position both the Wireless Transmitter (RFU-T6100) and Wireless Receiver (RFU-R6100) at least 2 meters

(6.6 ft.) apart.

• The control distance of the RF signal is about 30m (100 ft.) provided there is no obstacle.

5 Connect and carefully match the colors of the wires on the Wireless Transmitter (RFU-T6100) to the corresponding sur-

round speaker terminals on your Receiver.

• The Wireless Transmitter (RFU-T6100) power indicator lights up green.

6 Check and adjust the 4-channel toggle switch on the  Wireless Receiver (RFU-R6100) (CHANNEL SELECTOR switch) and

Wireless Transmitter (RFU-T6100), so that both units are using the same channel.

7 On your Receiver, play an audio source and activate the surround sound mode option. Adjust the volume to reproduce

surround sound in the rear speakers.

8 Extend the antenna vertically on both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) to im-

prove reception. Check the antennas are safely positioned without obstruction.

To ensure quality sound production and transmission

• Place both the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) off the ground (recommended minimum

height of 30cm (1 ft.)).

• Avoid placing the Wireless Transmitter (RFU-T6100) too close to your Receiver, AC adapter, TV or other electrical equipment as it

may cause electrical interference.

• In case of sound distortion, please select another channel for both the Wireless Receiver (RFU-R6100) and Wireless Transmitter

(RFU-T6100). The distortion could be the result of interference caused by other equipment using same frequency channel in your
house or neighbourhood.

Operation

4

1

Surround

Speaker (R)

Receiver

Wireless Receiver

(RFU-R6100)

Surround

Speaker (L)

Wireless Transmitter

(RFU-T6100)

Left (Blue and Black)

Right (Gray

and Black)

Wireless Transmitter

(RFU-T6100)

Wireless Receiver

(RFU-R6100)

4

1

4-channel switch

CHANNEL SELECTOR switch

Use the enclosed AC adaptor
(AC-150015A) for this product.

Summary of Contents for RFU-6100









Reviews: