Kenwood R-SE9T Instruction Manual Download Page 46

Page: 46 / 57

R-SE9 T/ DP-SE9 / X-SE9 (En)

Timer operation

Set a disc into the
M D recorder.

Select a program No.

Adjust the listening volume.

M ake preparations for the play (recording).

For recording of broadcasts, muting becomes ON auto-
matically w hen the pow er is sw itched on by the timer.

M ake prepa-
rations for re-
cording.

•

(Steps 1 to 4)

To listen to CD

To listen to tape

Listening to M D

For recording

Set a tape into deck.

Insert a disc.
(Program playback
is not possible.)

The station should
be preset prior to
the above.

To listen to radio

Timer programming

This is a 24 hour timer.
Select the time and duration for the operation and the contents, and select operation or no operation
as required.

The

“PROG.” indicator lights.

When a timer reservation already has been made, the
contents w ill change to the new settings.

Adjust the clock before setting the timer.

For recording and playback w ith an M D
recorder (DM -SE9), also refer to the instruc-
tion manual enclosed w ith the DM -SE9.

During display of program content

R-SE9T

Set the on/standby sw itch to standby
position.

1 ) ) )

PROG.

enter

volume
control

on/standby

band

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for R-SE9T


























































Search results

Summary of Contents for R-SE9T

Reviews:

Related manuals for R-SE9T

Brands by name

Popular brands

Kenwood R-SE9T, Instruction Manual

Search results

Summary of Contents for R-SE9T

Reviews:

Related manuals for R-SE9T

Brands by name

Popular brands