Kenwood R-K1 Instruction Manual Download Page 6

Page: 6 / 40

ENGLISH

Connections

FM indoor antenna

The provided FM antenna is a simplified one for indoor use, in-

tended for temporary use. To receive FM stations stably, it is rec-

ommended to use an outdoor antenna (commercially available).

Remove the FM indoor antenna after connecting the outdoor an-

tenna.

FM outdoor antenna (commercially available)

To receive FM broadcasting more clearly, it is recommended

to use an FM outdoor antenna. Use a 75-Ω coaxial cable, lead it

indoors and connect to the [

FM 75 Ω

] terminal. Remove the FM

indoor antenna after connecting the outdoor antenna.

Caution for FM outdoor antenna installation

Since antenna installation necessitates skill and experi-

ence, always consult your dealer before installation. The

antenna should be placed at a distance from the power

distribution wires. Otherwise, an electric shock accident

may occur if the antenna falls down.

How to connect the AM loop antenna cord

Push the lever

Insert the cord

Return the lever

FM outdoor antenna

(commercially

available)

AM loop antenna

The provided AM antenna is an indoor antenna. Install it as apart as

possible from the main unit, TV set, speaker cords and power cord

and orient it in the direction that offers best reception condition.

Antenna adaptor

(commercially available)

FM indoor antenna (accessory)

Attach to the stand

AM loop antenna (accessory)

How to connect the FM indoor antenna cord

Connect the antenna to the antenna terminal

Find the antenna location that offers best reception

Fix the antenna in the found location

Caution for connection

Do not plug the power cord into the power outlet until all

other connections are completed. Before unplugging a con-

nected cord or cable, be sure to set the power key to OFF and

unplug the power cord from the power outlet in advance.

Malfunction of microcomputer

If the system does not work properly or the display shows

wrong information even when correct connections are made,

reset the microcomputer referring to "

Resetting the Micro-

computer

". (See page 38.)

CAUTION

Observe the following cautions when installing the system.

Insufficient heat radiation may build up internal heat and

cause a malfunction or fire hazard.

Do not place an object that may hinder heat radiation on the system.

Leave the spaces specified below around the cabinets of the main unit.

Top panel:50cm or more

Side panel:10cm or more
Back panel:10cm or more

Install the system so that the power outlet is easily accessible

from the user, and unplug the power cord from the power

outlet immediately in case of a trouble. Note that the power

supply to the system is not shut down completely by simply

setting the power key to OFF. To shut down the power supply

completely, it is required to unplug the power cord.

Fit into the groove.

Connecting the antennas

AM/FM radio stations cannot be received without the proper antenna connections. Connect the antennas properly according to the fol-

lowing instructions.

Summary of Contents for R-K1









































Search results

Summary of Contents for R-K1

Reviews:

Related manuals for R-K1

Brands by name

Popular brands

Kenwood R-K1, Instruction Manual

Search results

Summary of Contents for R-K1

Reviews:

Related manuals for R-K1

Brands by name

Popular brands