24
RAN (RADIO ACCESS NUMBER)
RAN is a signaling system designed for Digital transceiver communications. When
a channel is set up with a RAN, squelch will only open when a call containing
a matching RAN is received. If a call containing a different RAN is made on the
same channel you are using, you will not hear the call. This allows you to ignore
(not hear) calls from another parties who are using the same channel.
1
Enter the Channel setup mode {p.15}.
2
Press the
or
button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
OFF
RAN is not set.
~
1~63
You can set 1 to 63 RAN.
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.