14
VOICE OPERATED TRANSMISSION (VOX)
VOX operation allows you to transmit hands-free. This feature
must first be activated by your dealer, and can only be used if
you are using a supported headset. VOX can be turned off for
specific channels by your dealer. To activate VOX and set the
VOX Gain level, perform the following steps:
1
Connect a headset to the transceiver.
•
The VOX function does not activate when a headset is not
connected to the accessory terminal of the transceiver.
2
With the transceiver power OFF, press and hold the
Side 1
key while turning the transceiver power ON.
3
Continue to hold the
Side 1
key until a beep sounds.
•
The LED indicator lights orange.
•
When the
Side 1
key is released, the transceiver will announce
the VOX Gain level.
4
Press the
Side 1
key to set the VOX Gain level, from 1 (least
sensitive) to 10 (most sensitive).
•
Press the
Side 2
key to enable or disable the VOX function for
the current channel (you can change this setting for each channel
by selecting a channel with the
Channel
selector). When turned
ON, a beep sounds. When turned OFF, a double beep sounds.
5
Press the
PTT
switch
to save the setting.
•
A beep will sound.
•
The transceiver announces the new VOX Gain level.
6
Turn the transceiver power OFF and then ON again to
activate VOX.
Note:
◆
If key lock or key lock with status memory is ON, you will be unable
to enter VOX setup mode.
◆
If a headset is connected to the transceiver while the VOX function
is switched ON and the VOX Gain level is configured to a higher,
more sensitive level, louder received signals may cause the
transceiver to start transmitting.
◆
If no operation is performed for 20 seconds, the transceiver will exit
VOX setup mode.
B62-2580-00_01-18.indd 14
7/5/13 1:56 PM
