manualshive.com logo in svg

Kenwood MP642U - Radio / CD, Instruction Manual

Share
Download
Kenwood MP642U - Radio / CD Instruction Manual Download Page 40

40

   

|

   

KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Bluetooth Setup

SMS (Short Message Service)

The SMS arrived at the cell-phone is displayed on 
the receiver. 
A newly arrived message is displayed.

¤

•  To prevent car accidents, the driver should not read the 

SMS while driving.

When a new message arrives

“SMS Received” is displayed.
The display disappears with any operations. 

Displaying the SMS

1

  Select SMS Inbox mode

Select “BT” 

>

 “SMS” 

>

 “SMS Inbox”.

For how to select Function Control item, refer to 
<Function Control> (page 6).

2

  Enter SMS Inbox mode

Press the Control knob.

A message list appears.

3

  Select a message

Turn the Control knob.

Each pushing of the Control knob towards right or 
left switches between telephone number or name 
and message reception date.

4

  Display the text

Press the Control knob.

Turning the Control knob scrolls the message.
Pressing the Control knob again returns to the 
message list screen.

5

  Exit SMS Inbox mode

Press the [FNC] button.

⁄

•  The unopened message is displayed at the beginning 

of the list. Other messages are displayed in the order of 
reception.

•  The SMS that has arrived when the cell-phone is not 

linked with Bluetooth cannot be displayed. Download 
the SMS.

•  The short message cannot be displayed during 

downloading the SMS.

Downloading the SMS

Download the short message (SMS) arrived at the 
cell-phone so that it can be read on this unit.

1

  Select SMS download mode

Select “BT” 

>

 “SMS” 

>

 “SMS Download”.

For how to select Function Control item, refer to 
<Function Control> (page 6).

2

  Enter SMS download mode

Press the Control knob.

A message list appears.

3

 Start downloading

Press the Control knob.

“SMS Downloading” is displayed.
When the downloading finishes, “Completed” is 
displayed.

4

  Exit SMS download mode

Press the [FNC] button.

⁄

•  The cell-phone must be able to transmit the SMS using 

Bluetooth. Setting on the cell-phone may be required. 
If the cell-phone does not support SMS function, the 
SMS download item in Function Control mode is not 
displayed.

•  When the SMS is downloaded from the cell-phone, the 

unopened messages in the cell-phone are opened.

•  The already-read and unread short messages can be 

respectively downloaded up to 75.

Function of KDC-X993
KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory)

B64-4416-00̲00̲09FLIP̲K̲en.indd   40

B64-4416-00̲00̲09FLIP̲K̲en.indd   40

09.1.7   3:54:09 PM

09.1.7   3:54:09 PM

Summary of Contents for MP642U - Radio / CD





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands