MDX-F1 (EN)
24
Operation
If you load a tape in the cassette deck in advance while
the power is off. pressing the TAPE key (
2
,
3
) turns
power on automatically and starts the tape playback.
1
Open the door.
Push the area marked
0
PUSH
OPEN.
2
Insert a tape and close the door.
During playback, the tape
running direction changes
each time the key is pressed.
When playback or recording is started automatically by the
one-touch operation function, etc., the tape is transported
in the direction used the last time the tape was stopped.
(To change the tape transport direction, press the TAPE key
(
2
,
3
) during playback then press the stop key (
7
).)
Transport direction indicators
Playback of tape
÷
Normal (TYPE ), high (TYPE ), or metal (TYPE
) tape
selection is set automatically.
÷
Remove tape slack before loading.
÷
Close the door securely.
÷
Do not use a tape which is longer than 100 minutes, for
it easily causes troubles such as tape entanglement or
cutting.
Lights
Load a cassette tape.
1
Start playback.
2
T A P E
P L A Y
0 1 2 3
2 3
TAPE
T A P E
S T O P
0 0 0 0
A
Reverse mode indication
Displayed when the deck is loaded with a tape.
0
2
1
2
0
P
USH OPEN
