Kenwood MDX-01 Instruction Manual Download | Manualshive

Page: 6 / 60

background image

6

EN

Connections

AM loop antenna (x 1)

Remote control unit (x 1)

R6/SUM-3 batteries

for remote (x 2)

Confirm that the following accessories are present

RC-M

DX0

001

AM loop antenna
stand (x 1)

Loading batteries in the remote control unit

÷

The provided batteries are intended for use in operation checking, and their service life may be short.

÷

When the remote-controllable distance becomes short, replace both of the batteries with new ones.

÷

If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor on the main unit front panel, malfunction may occur. In such a case, change the installation position
to avoid malfunction.

÷

When pressing more than one remote control keys successively, press each key securely by leaving an
interval of 1 second or more between keys.

÷

The standard remote-control range is within about 6 meters from the main unit front panel. Be sure to point
the remote to remote sensor on the front panel.

(3) Attach the battery com-

partment cover.

(2) Insert two R6/SUM-3/"AA"-

size batteries following the po-
larity indications.

(1) Remove the battery com-

partment cover of the re-
mote.

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your
dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the
consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the
unit in the future.

Keep this manual handy for future reference.

«
...
4
5
6
7
8
...
»

Summary of Contents for MDX-01





























































Reviews:

No comments

Related manuals for MDX-01

Brand: Panasonic Pages: 280

Brand: Panasonic Pages: 872

Easa-Phone VA-208

Brand: Panasonic Pages: 45

Easa-Phone VA-208

Brand: Panasonic Pages: 45

Brand: Panasonic Pages: 408

Brand: Samsung Pages: 128

Brand: Samsung Pages: 33

Brand: Cadman Pages: 70

Brand: Tecsun Pages: 1

Brand: Toa Pages: 1

Brand: WeldKing Pages: 31

Brand: Patlite Pages: 38

Brand: Labkotec Pages: 19

Brand: Subpac Pages: 15

Brand: Gemini Pages: 20

Brand: JBL Pages: 157

MFIT MERCEDES SPRINTER W907 EVO 2

Brand: Audio System Pages: 2

Brand: Balluff Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands