LZ-702W
10
TEST MODE
●
SYSTEM screen
• SYSTEM 1/2/3 screens are the same as in normal mode
(user mode).
●
Key
• Tact key function is the same as in normal mode (user mode).
●
Custom code TV remote controller
• Use the remote controller with the TV mode.
Keys that are not shown below are the same as in normal
mode (user mode).
Key Code
Item
Direct
Start writing Chroma IC adjustment or
cancel the mode after write is finished.
Execution (Play/Pause) Setup or cancel Chroma setup
Tenkey7
To the items before Chroma adjustment
Tenkey8
Change the Chroma setup value (UP)
Tenkey9
To the items after Chroma adjustment
Tenkey0
Change the Chroma setup value (DOWN)
Tenkey3 (Preset3)
Change the V-IN mirror mode
Tenkey4
Auto Dimmer On/Off
●
Screen maintenance section
• When in the test mode, it boots up in Video1 screen
→
Press
[MENU] key, and move to the test mode SET UP screen.
• Connect AV OUT to the V.SEL action to allow switching.
(When the Video is AV-IN1 or AV-IN2)
V. SEL Flow: AV-IN1
→
AV-IN2
→
NAV
→
AV-IN1
→
• • •
• For the reverse condition, it needs to be set ON when in the
test mode (R-CAM is always available in V.SEL).
(When detecting reverse, R-CAM interruption will occur as
is in normal mode)
●
Setup contents for booting up in the test mode
Except for AV-IN2 and screen adjustment, it boots up in de-
fault regardless of E2PROM’s last value.
●
AV-IN2 Initial configuration
• R-cam
• Reverse On
• Mirror Off
●
Screen adjustment
• Default is center. Click once to change between Full_Down
↔
Center
↔
Full_Up.
• BRT default is MAX.
• Auto_Dimmer’s default is off, and Dimmer level is 0 to elimi-
nate the wait time for switching detection.
●
E2PROM
When booting up in test mode, the last value does not reflect
the contents of E2PROM.
When test mode is functioning, even the last value has been
changed, it does not write to E2PROM. (Chroma, Touch 4 po-
sitions, HPOSI will write to)
∗
Chroma: The adjusted value in 3 items on Chroma Auto
screen, Chroma Func screen, Chroma screen.
●
E2PROM contents clear
• On the SYSTEM 3 screen, the last value can be cleared.
• On the information screen, Chroma adjustment value, Touch
4 positions revised value, and HPOSI adjustment value can
be cleared.
∗
Chroma: The adjusted value in 3 items on Chroma Auto
screen, Chroma Func screen, Chroma screen.
●
E2PROM user setup clear mode
How to enter the mode.
Press and hold the [SCRN] and [MENU] keys and reset.
Special functions in the E2PROM user setup clear mode.
E2PROM user setup clear mode will boot up even when
last power is off.
It clears E2PROM user setup when booting up. (Do not clear
Chroma, Touch 4 positions, HPOSI)
∗
Chroma: The adjusted value in 3 items on Chroma Auto
screen, Chroma Func screen, Chroma screen.
