Kenwood LZ-702IR - LCD Monitor, Service Manual

Page: 9 / 36

LZ-702IR
9
TEST MODE
To the HPOSI screen (Horizontal position adjustment)
: [
↓
] (M/S) key on the remote controller
To the Chroma Auto screen (
γ
-IC auto adjustment)
: [
↑
] (BAND+) key on the remote controller
To the Chroma Func screen (TINT and Phase adjustment)
: [ ] key on the remote controller
To the Chroma screen (COM DC adjustment)
: [ ] key on the remote controller
To the Information screen (Version display)
●
Information screen
• Below is the displayed contents on the information screen.
µ
-com Version
ROM Correction Version
●
HPOSI screen
• After Screen Position Adjustment, save the memory into
the E2PROM.
Adjust the Video.
• E2PROM normal write or abnormal result will display on
the screen.
• Press the MENU key to send the items.
• When selecting [Next], press [
→
] key to start writing to
E2PROM. When selecting UP or DOWN, press [
←
] key or
[
→
] key to adjust HPOSI.
When neither UP or DOWN is selected, pressing [
←
] key
cancels the HPOSI mode.
• Remote controller operation
Tenkey 7: Cancel
Tenkey 0: Adaptation Value Down
Tenkey 8: Adaptation Value Up
Tenkey 9: E2PROM write start
●
Chroma Auto screen
• After the Auto adjustment for Chroma, save the memory
into the E2PROM.
Auto Adjustment items: RGB_Amplitude
→
Bright
→
Ganma1
→
Ganma2
→
CONT_RGB2
→
SUB_Bright_R
→
SUB_Bright_B
→
COM_Amplitude
• E2PROM normal write or abnormal result will display on
the screen.
• While “OK” or “NG” is displayed , press the [
←
] key to can-
cel the adjustment screen.
• Remote controller operation
While “OK” or “NG” is displayed, press the [FM] key to can-
cel the adjustment screen.
●
Chroma Func screen
• After the Chroma adjustment, save the memory into the
E2PROM.
• Press the [MENU] key and switching the item.
When selecting the “Next” items, switching the item by press-
ing [
←
] key or [
→
] key.
When selecting the UP or Down items, switching the ad-
justment value by pressing [
←
] key or [
→
] key.
When selecting the Set items, confirm or cancel the adjust-
ment value by pressing [
←
] key or [
→
] key.
When selecting “OK” items, press [
←
] key and [
→
] key to
write to E2PROM. When normal or abnormal result is being
displayed, cancel the adjustment screen.
• It allows the setup operation using remote controller. (Refer
to the section for Custom code TV remote controller)
• Chroma IC adjustment screen (Item setup)
→
Write to
E2PROM
Setup items: Tint adjustment (00h-FFh)
Phase adjustment (00h-3Fh)
• E2PROM normal write or abnormal result will display on
the screen.
Tenkey 7 or 9: Change items
Tenkey 8 or 0: Adaptation Value Up or Down
DIRECT: When E2PROM write or E2PROM write result is being
displayed, cancel the adjustment screen.
Execution (Play/Pause) : Confirm or cancel the Chroma setup
value.
●
Chroma screen
• After the Chroma adjustment, save the memory into the
E2PROM.
• Press the MENU key to switch the item.
When selecting the UP or Down items, switching the ad-
justment value by pressing [
←
] key or [
→
] key.
When selecting the Set items, confirm or cancel the adjust-
ment value by pressing [
←
] key or [
→
] key.
When selecting “OK” items, press [
←
] key or [
→
] key to
write to E2PROM. When normal or abnormal result is being
displayed, cancel the adjustment screen.
• It allows the setup operation using remote controller. (Refer
to the section for Custom code TV remote controller)
Setup items: COM DC (00h-FFh)
• E2PROM normal write or abnormal result will display on
the screen.
Tenkey 8 or 0: Adaptation Value Up or Down
DIRECT: When E2PROM write or E2PROM write result is being
displayed, cancel the adjustment screen.
Execution (Play/Pause) Confirm or cancel the Chroma setup
value.
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299