ENGLISH
6
EN
LS-X70 1261-00_00
System .................
3 way 6 speakers (Magnetically shielded)
Enclosure ........................
Resonance Acoustic Tube System
Woofer .................................... 80 mm (3") Cone type
×
4
Midrange ...................................... 80 mm (3") Cone type
Tweeter ..................................... 19 mm (3/4") Dome type
Nominal Impedance .......................................................
8
Ω
Peak Input Power ...........................................................
130 W
Sensitivity ..................................................
84 dB / W at 1 m
Specifications
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
notice.
Frequency Response ....................................
38 Hz~100 kHz
Dimensions
Width ............................................................ 228 mm (9")
Height .............................................. 1,119 mm (44-1/16")
Depth ................................................ 325 mm (12-13/16")
Net Weight ........................................
15.7 kg (34.6 lb) /piece
Accessories
Speaker wire (10 m (32 ft)) ............................................ 1
2
Connect the speaker wire to the terminals.
The lower pair of speaker terminals is used to connect the woofer, and the upper pair is used to connect the midrange/
tweeter.
•
When distributing the speaker wires through the hole on the base, see
“Lay the speaker wire.”
in step
2
on page 4.
•
The speaker wire can also be connected to the speaker by using banana plugs which are commercially available in audio
stores.
Read
“Connect the speaker wire to the input terminals of the speaker.”
in step
1
on page 4.
R
L
SPEAKER
-
+
ª
·
ª
·
·
ª
·
ª
ª
·
ª
·
ª
·
ª
·
3
Secure
1
Loosen
2
Insert the conductor
Right
Speaker terminals
(Amplifier or AV control center)
Left
When the amplifier or AV Control Center has two speaker output circuits that can be output simultaneously (i.e. when
there are speaker outputs A and B and the “A+B” speaker output can be selected), the speakers can be connected as
shown below. With this connection, be sure to set the speaker selector of the amplifier or AV Control Center to “A+B”.
R
L
SPEAKER
A
-
+
R
L
SPEAKER B
-
+
·
ª
·
·
ª
ª
·
ª
ª
·
ª
·
ª
·
ª
·
Right
Speaker terminals
(Amplifier or AV control center)
Left
Summary of Contents for LS-X70
Page 2: ...ENGLISH 2EN LS X70 1261 00_00 ...
Page 27: ...27ES ESPAÑOL LS X70 1261 00_00 ...
Page 28: ......