18
KVT-M707/M707Y
●
Remote Controller
• Using NA-R300 (SW: AUD), the following operations will be
conducted (Normal operation other than the following)
Key code
Item
Direct
Chroma IC adjustment mode ON/OFF (Write)
Band (FM+)
Video mode switching (NAVI/AVIN/DVD)
M/S (AM-)
DVD audio/video confirmation switching
Performance
Chroma setting value set/release
(Play/Pause)
Ten key 7
To previous item of chroma adjustment
Ten key 8
Chroma setting value change (UP)
Ten key 9
To next item of chroma adjustment
Ten key 0
Chroma setting value change (Down)
Ten key 1
DVD 5.1ch audio confirmation switching
(Preset 1)
(DVD source only)
Ten key 2
DC Offset detection check direct switching
(Preset 2)
(CD-CH source only)
Ten key 3
V-IN mirror mode switching
(Preset 3)
Ten key 4
HPOSI DVD confirmation direct switching
(Preset 4)
●
Screen Management section
• While in the Test Mode (Including connection with special
µ
-com/jig), the startup will be with VIDEO screen.
→
Transi-
tion to Test Mode Main screen is made with [FNC] key.
• In coordination with V.SEL, AV OUT is also switched. (AV
OUT with Graphic and NAVI can be anything.)
AVIN1 – (AVIN2) – (TV) – R-CAM – NAVI-DVD (NO specific
• Easy Control screen can be skipped using [FNC] key.
• Parking detection is ignored in Test Mode. However, Park-
ing is not ignored when Unit is special.
• Reverse condition occurring in Test Mode will be made On
condition (V.SEL always has R-CAM). However, when Unit
is special, it will be as usual.
(When detected, Reverse will cause R-CAM interruption,
as usual.)
• Default screen of System Setup will be made System 2.
• Default screen of Audio Setup will be made Speaker Setup.
• Default speaker selected of Speaker Setup will be made
Sub-woofer.
• When VIDEO 1 video is input or at signal switching (NTSC
↔
PAL) will not be OSD displayed. (OSD display will be
made at V.SEL switching. Display will not be made at the
time of VIDEO 1.)
TEST MODE
●
BEEP Control
• Beep will be sound regardless of destinations
(When Standby sourcing, Beep will not be sound as PWIC
limitation item.)
●
DSI Control
• Default of DSI will be On.
●
AVIF
• AVIN2 (AVIN1 for models with no AVIN2) Interruption will
be made default On.
• NAVI interruption SP setting will be default FRONT ALL.
• V-IN mirror mode switching will be conducted with remote
controller Tenkey [3].
• R-CAM Interruption will be made default On (Unit SP only).
●
SCREEN Adjustment
• Default is center. With one click, Full Down
↔
Center
↔
Full Up.
• Default for BRT is MAX.
• The default for Auto Dimmer is Off and Dimmer Level 0.
Wait for switching detection will be cut.
●
Audio
• Default for Volume is Step 30.
• Bal/Fad setting is 1 click: Min
↔
Center
↔
Max
• Default for Line Mute is On.
• X’over setting is 1 click: Min
↔
Max
• Tone setting is 1 click: Min
↔
Center
↔
Max
• Default for Tone (EQ) is Flat.
• Default for System Q is OFF.
• When equipped with Digital Out terminal, setting will be for
always output On.
●
TUNER
• When E2PROM cannot be accessed, Error display will be
made. (Tuner screen)
• Forced Narrow/ Middle/ Wide switching of K3I.
By pressing more than 1 sec. on Preset 4
: Forced Narrow (
∗∗∗
.
∗
1MHz)
By pressing more than 1 sec. on Preset 5
: Forced Middle (
∗∗∗
.
∗
2MHz)
By pressing more than 1 sec. on Preset 6
: Forced Wide (
∗∗∗
.
∗
3MHz)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
