Kenwood KVT-935DVD Page 5 Instruction Manual Download

Page: 5 / 52

English

Open the monitor

Close the monitor

Opening/Closing the Monitor and Power Switch

Removing/Attaching the Protection Panel

English 9

8 English

Remove the protection panel

Attach the protection panel

Place the right end of the protection panel onto
hooks and push it until clicked and locked.
Then, push the left end of the panel to lock it.

[OPEN/CLOSE] key

• Close the monitor first, then remove or attach the protection panel.

• After you have removed the protection panel, you cannot operate the receiver.

• After you have removed the protection panel, you can flash the burglar alarm lamp (see page 57).

• Do not touch the moving components when you are opening or closing the monitor. If done, you will get hurt.

• Do not try to open or close the monitor by hand.

• You can automatically open or close the monitor when you turn on or off the ignition key (see page 44).

• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is

canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also
canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.

[Source] key

Turn the power
switch on

Hold down the [Source] key more than
one second to turn it off.

Two hooks

Summary of Contents for KVT-935DVD





















































Search results

Summary of Contents for KVT-935DVD

Reviews:

Related manuals for KVT-935DVD

Brands by name

Popular brands

Kenwood KVT-935DVD, Instruction Manual

Search results

Summary of Contents for KVT-935DVD

Reviews:

Related manuals for KVT-935DVD

Brands by name

Popular brands