4
|
KVT-524DVD/KVT-554DVD/KVT-54DVDR
Connecting Wires to Terminals
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
PRK SW
USB connector
USB device
(commercially available)
FUSE ( 15A )
Connector A
Connector B
Ground wire (Black)
To connect the Kenwood navigation system,
consult your navigation manual.
To use the steering wheel remote control feature, you need to an
exclusive remote adapter (not supplied) matches your car is required.
When this terminal is not in use, leave its cap on.
For the sake of safety, be sure to connect the parking sensor.
Battery wire (Yellow)
Ignition wire (Red)
Steering remote control input (Light Blue/Yellow)
To steering remote
If no connections are made, do not let the cable come out from the tab.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Mute wire (Brown)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Power control/ Motor antenna control wire
(Blue/White)
Reverse sensor wire (Purple/White)
Parking sensor wire (Light Green)
Connect to vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle's parking brake detection
switch harness.
B54-4700-00̲00̲English.indd 4
B54-4700-00̲00̲English.indd 4
08.10.28 11:55:49 AM
08.10.28 11:55:49 AM
