7
installation
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required:
Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
installing the water tank
• Insert the valve of the water tank into the hole of the water dispenser and push down the
water tank to attach securely with the water dispenser.
• To remove the water tank, hold firmly on both sides and bottom of the water tank then push
up.
Valve
Be careful not to press on the valve.
• Make sure the rubber seal inside the hole
is in proper position before installing the
water tank. This is because the rubber
seal may turn inside out when removing
the water tank.
• A tiny part of the rubber seal will appear
torn. This is not a damage. On the
contrary, it helps to prevent the rubber
seal from turning inside out when
removing the water tank.
KTLD60X15/B17_IB_161216_grace.indd 7
16/12/16 2:09 pm
