Installation
4
Connection
( 1A )
TV ANTENNA INPUT
TO MONIT
OR UNIT
( 1A )
–
+
(Accessory
D
)
Ignition wire (Red)
ª
12V
ACC
Ignition key switch
Ground wire (Black)
·
(To car chassis)
Battery
Car fuse box
(Main fuse)
• Make sure to ground the unit to a negative 12V DC power supply.
• If your car's ignition does not come with an ACC position, connect the ignition wires
to a power source that can be turned on and off with the ignition key. If you connect
the ignition wire to a power source that receives a constant voltage supply, as with
battery wires, the battery may die.
• If the fuse blows, first make sure that the wires have not caused a short circuit, then
replace the old fuse with one with the same rating.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the
car are working properly.
(Accessory
A
)
(Black)
Remove the protective sheet on
the black connector before the
KTC-V500E is connected.
(White)